Glazing Bars & Accessories

We offer a variety of glazing bars and accessories. We are an authorised distributor for Exitex products including their Capex range of glazing bars and Cresfinex range of ridges.

For multiwall sheeting, we recommend the following accessories:

  • U Profiles - one PVC U Profile at the gutter end of each sheet
  • F Profiles - one aluminium or PVC F Profile at the left and right side of each roofing area
  • Capping / Glazing Bars - one to join each sheet (if you have more than one sheet)
  • PVC Fixing Buttons - to be used on the intermediate rafters, spaced 600mm / 2ft apart

We stock additional accessories, which are listed below.

Please click here for a link to photos of our display unit showing these accessories in use with our multiwall polycarbonate sheeting.

Sidebar

Categories

Availability

Price

€
to
€

Featured Products

6mm Twin Wall Polycarbonate Sheeting - Clear 6mm Twin Wall Polycarbonate Sheeting - Clear
Goldstar
Choose Options
6mm Twin Wall Polycarbonate Sheeting - Clear
6mm twin wall polycarbonate sheeting is ideal for lean-tos, canopies, pergolas, gazebos, conservatories, porches, industrial roofing, interior partitions, and more. Twin wall sheeting is most suitable for areas with a short fall (under 3 metres) where cover is required. For longer falls, please see...
From €27.25 ex VAT
From €27.25
Choose Options
10mm Multiwall Polycarbonate Sheeting - Clear 10mm Multiwall Polycarbonate Sheeting - Clear
Goldstar
Choose Options
10mm Multiwall Polycarbonate Sheeting - Clear
10mm multiwall polycarbonate sheeting is ideal for lean-tos, canopies, pergolas, gazebos, conservatories, porches, industrial roofing, interior partitions, and more. Twin wall sheeting is most suitable for areas with a short fall (under 3 metres) where cover is required. For longer falls, please see 16mm...
From €34.75 ex VAT
From €34.75
Choose Options
16mm Multiwall Polycarbonate Sheeting - Clear 16mm Multiwall Polycarbonate Sheeting - Clear
Goldstar
Choose Options
16mm Multiwall Polycarbonate Sheeting - Clear
16mm multiwall polycarbonate sheeting is ideal for lean-tos, canopies, pergolas, gazebos, conservatories, porches, industrial roofing, interior partitions, and more. 16mm multiwall polycarbonate is most suitable for roofing in windy areas or for roofs with a long fall (over 3 metres). If heat retention /...
From €47.75 ex VAT
From €47.75
Choose Options
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • 40/51 Aluminium Capping Bar 40/51 Aluminium Capping Bar
    Goldstar
    Choose Options
    40/51 Aluminium Capping Bar
    40mm wide aluminium capping bar with rafter gasket included. Please select both the length and colour to get the price for the item. Ideal for capping roofs with polycarbonate (any thickness) or glass. This bar is for use with rafters up to 50mm / 2"...
    From €36.50 ex VAT
    From €36.50
    Choose Options
  • 60/71 Aluminium Capping Bar 60/71 Aluminium Capping Bar
    Goldstar
    Choose Options
    60/71 Aluminium Capping Bar
    60mm wide aluminium capping bar with rafter gasket included. Please select both the length and colour to get the price for the item. Ideal for capping roofs with polycarbonate (any thickness) or glass. This bar is for use with rafters up to 50mm / 2"...
    From €36.50 ex VAT
    From €36.50
    Choose Options
  • PVC U Profile PVC U Profile
    Goldstar
    Choose Options
    PVC U Profile
    PVC U profile to be used at the gutter end of each sheet. These profiles are 2100mm in length. This profile protects the breathable ventilated tape that we put on each sheet of polycarbonate and stops the tape from damage due to weather. As a...
    From €9.95 ex VAT
    From €9.95
    Choose Options
  • Aluminium F Profile Aluminium F Profile
    Goldstar
    Choose Options
    Aluminium F Profile
    Aluminium F Profiles are used on the side of polycarbonate or glass roofs as a glazing side support and closure. They can be screwed in at the side into the timbers in order to stop sheets from lifting in windy conditions. Colours: White and Brown...
    From €35.00 ex VAT
    From €35.00
    Choose Options
  • Neutral Silicone 310ml Wurth
    Goldstar
    Choose Options
    Neutral Silicone 310ml Wurth
    A low modulus, non acid toxy silicone for use with polycarbonate roof sheet. As some silicones can attack polycarbonate, a neutral silicone needs to be used with polycarbonate roof sheet. Use neutral silicone to prevent leaks at joints and at all points where the...
    €7.72 ex VAT
    €7.72
    Choose Options
  • Breather Tape Breather Tape
    Goldstar
    Choose Options
    Breather Tape
    ** The price is per linear metre. ** Breather tape with a fabric membrane to allow free movement of air within the multiwall sheet structure. Prevents damage due to thermal expansion whilst minimising condensation and preventing dust or insects entering the sheet. This ventilation tape...
    €1.00 ex VAT
    €1.00
    Choose Options
  • Aluminium Tape
    Goldstar
    Choose Options
    Aluminium Tape
    ** The price is per linear metre. ** Aluminium tape to seal the top edge of multiwall polycarbonate sheet, preventing the ingress of dirt, insects and algae. Sold by the linear metre.- 25mm tape width for use with 6mm, 8mm & 10mm Multiwall sheet- 38mm...
    €0.75 ex VAT
    €0.75
    Choose Options
  • Flashing Tape
    Goldstar
    Choose Options
    Flashing Tape
    ** The price is per linear metre. ** Apply butyl tape between the wall and the rafter supports to create a watertight seal between the wall and the roof before the roof is installed.  Butyl tape is suitable for use on most surfaces. Sold by the...
    €7.30 ex VAT
    €7.30
    Choose Options
  • PVC Fixing Buttons PVC Fixing Buttons
    Goldstar
    Choose Options
    PVC Fixing Buttons
    PVC fixing buttons and screws for multiwall polycarbonate. The price is for each pack of ten fixing buttons. We recommend spacing these buttons every 2 feet / 600mm on the intermediate rafters. Made from extremely durable nylon, available in white or brown colours, and includes the cap, gasket...
    From €9.00 ex VAT
    From €9.00
    Choose Options
  • Magnetic Tape for Secondary Glazing Magnetic Tape for Secondary Glazing
    Goldstar
    Choose Options
    Magnetic Tape for Secondary Glazing
    Self Adhesive Magnetic Tape KIT: 20mm wide x 15mtr long x 1.5mm Thick approx This tape is ideal for use with our Solid Polycarbonate sheeting or acrylic sheeting for use in secondary glazing applications. The tape is supplied with an adhesive backing (with side A or side B...
    €39.95 ex VAT
    €39.95
    Choose Options
  • Lean-To Flashing Profile (LTF) Lean-To Flashing Profile (LTF)
    Goldstar
    Choose Options
    Lean-To Flashing Profile (LTF)
    Aluminium Lean-To Flashing Profile. Suitable for use with a polycarbonate (any thickness) or glass roof, for covering the gap in between the top of the sheets and the wall of the building. Lengths: 3m or 6m.  Colours: White, brown.
    From €76.34 ex VAT
    From €76.34
    Choose Options
  • 40/51 Wall Flashing Profile (CWF) 40/51 Wall Flashing Profile (CWF)
    Goldstar
    Choose Options
    40/51 Wall Flashing Profile (CWF)
    40mm wall flashing profile with rafter gasket included. For use in roofing alongside the 40mm aluminium capping bar as a side profile where the glass or polycarbonate roofing sheets meet the wall of the building. Ideal for capping roofs with polycarbonate (any thickness) or...
    From €98.21 ex VAT
    From €98.21
    Choose Options
  • 60/71 Wall Flashing Profile (CWF) 60/71 Wall Flashing Profile (CWF)
    Goldstar
    Choose Options
    60/71 Wall Flashing Profile (CWF)
    60mm gable end finishing profile with rafter gasket included. For use in roofing alongside the Cap 60mm aluminium capping bar as a side profile where the glass or polycarbonate roofing sheets meet the wall of the building. Cap 60 bars are generally used with 3"...
    From €132.21 ex VAT
    From €132.21
    Choose Options
  • 40/51 Gable End Finishing Profile (CGF)
    Goldstar
    Choose Options
    40/51 Gable End Finishing Profile (CGF)
    40mm gable end finishing profile with rafter gasket included. For use in roofing alongside the 40mm aluminium capping bar as a side profile to cover the gable end of a roof. Ideal for capping roofs with polycarbonate (any thickness) or glass. Lengths: 3m or 6m. ...
    From €98.21 ex VAT
    From €98.21
    Choose Options
  • 60/71 Gable End Finishing Profile (CGF)
    Goldstar
    Choose Options
    60/71 Gable End Finishing Profile (CGF)
    60mm gable end finishing profile with rafter gasket included. For use in roofing alongside the  60mm aluminium capping bar as a side profile to cover the gable end of a roof. Cap 60 bars are generally used with 3" timbers. Ideal for capping roofs...
    From €132.24 ex VAT
    From €132.24
    Choose Options
  • Industrial Strength Adhesive
    Goldstar
    Choose Options
    Industrial Strength Adhesive
    Industrial Strength Adhesive 290ml tube of All Weather adhesive. Waterproof, industrial strength and heat resistant. Applied with standard silicone gun. Outstanding adhesive strength on a wide range of materials and surfaces. Approved for use with foodstuffs (ISEGA certificate) Harmless to health in hardened state...
    €7.00 ex VAT
    €7.00
    Choose Options

Recently Viewed Products