Your cart

Aluminium F Profiles are used on the side of polycarbonate or glass roofs as a glazing side support and closure. They can be screwed in at the side into the timbers in order to stop sheets from lifting in windy conditions. Colours: White and Brown...

PVC U profile to be used at the gutter end of each sheet. These profiles are 2100mm in length. This profile protects the breathable ventilated tape that we put on each sheet of polycarbonate and stops the tape from damage due to weather. As a...

** The price is per linear metre. ** Breather tape with a fabric membrane to allow free movement of air within the multiwall sheet structure. Prevents damage due to thermal expansion whilst minimising condensation and preventing dust or insects entering the sheet. This ventilation tape...

** The price is per linear metre. ** Aluminium tape to seal the top edge of multiwall polycarbonate sheet, preventing the ingress of dirt, insects and algae. Sold by the linear metre.- 25mm tape width for use with 6mm, 8mm & 10mm Multiwall sheet- 38mm...

A low modulus, non acid toxy silicone for use with polycarbonate roof sheet. As some silicones can attack polycarbonate, a neutral silicone needs to be used with polycarbonate roof sheet. Use neutral silicone to prevent leaks at joints and at all points where the...

PVC fixing buttons and screws for multiwall polycarbonate. The price is for each pack of ten fixing buttons. We recommend spacing these buttons every 2 feet / 600mm on the intermediate rafters. Made from extremely durable nylon, available in white or brown colours, and includes the cap, gasket...

** The price is per linear metre. ** Apply butyl tape between the wall and the rafter supports to create a watertight seal between the wall and the roof before the roof is installed.  Butyl tape is suitable for use on most surfaces. Sold by the...

40mm wide aluminium capping bar with rafter gasket included. Please select both the length and colour to get the price for the item. Ideal for capping roofs with polycarbonate (any thickness) or glass. This bar is for use with rafters up to 50mm / 2"...