PVC U profile to be used at the gutter end of each sheet. This profile protects the breathable ventilated tape that we put on each sheet of polycarbonate and stops the tape from damage due to weather. As a result nothing will be able to enter the sheets and they will stay looking good for longer.
These U Profiles clip on to the end of the sheet. Some installers choose to use silicone on the inside to help keep them from loosening in windy conditions.
PVC fixing buttons and screws for multiwall polycarbonate. The price is for each pack of ten fixing buttons. We recommend spacing these buttons every 2 feet / 600mm on the intermediate rafters.
Made...
Our high quality hygienic wall cladding made from PVC is suitable for use in food preparation areas, hospitals, kitchens, clean rooms, gyms, etc.
It is easily cleaned and has antibacterial...
PVC J Profile for use with our PVC hygienic wall cladding sheets. J Profiles come in 3.05 metre lengths in white colour only.
One J profile can be cut in half to cover the top and bottom of a sheet...
The small internal corner is used for joining two PVC hygienic wall cladding sheets together in a corner application.
Lengths available: 3050mm
Colour: White only
The large internal corner is used for joining two PVC hygienic wall cladding sheets together in a corner application. This larger corner is used when walls are off square and more coverage is...
10mm twin wall polycarbonate sheeting is ideal for lean-tos, canopies, pergolas, gazebos, conservatories, porches, industrial roofing, interior partitions, and more.
Twin wall sheeting is most...
Aluminium F Profiles are used on the side of polycarbonate or glass roofs as a glazing side support and closure. They can be screwed in at the side into the timbers in order to stop sheets from...
PVC fixing buttons and screws for multiwall polycarbonate. The price is for each pack of ten fixing buttons. We recommend spacing these buttons every 2 feet / 600mm on the intermediate rafters.
Made...
Capex snap down glazing bar. Suitable for polycarbonate of the following thicknesses: 10mm, 16mm, 20mm, 25mm
Available in the following sizes: 2m, 2.5m, 3m, 4m, 5m, 6m
Availble in White (RAL 9010)...
Capex 40mm gable end finishing profile with rafter gasket included. For use in roofing alongside the Capex 40mm aluminium capping bar.
Ideal for capping roofs with polycarbonate (any thickness) or...
Capex 40mm wide aluminium capping bar with rafter gasket included.
Ideal for capping roofs with polycarbonate (any thickness) or glass.
Available in the following lengths: 2.4m, 3.0m, 3.6m, 4.8m,...
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
