Capex 40mm wide aluminium capping bar with rafter gasket included.
Ideal for capping roofs with polycarbonate (any thickness) or glass.
Available in the following lengths: 2.4m, 3.0m, 3.6m, 4.8m, and 6m.
Available in white, brown or mill finish (unpainted). If you select mill finish (unpainted), we can arrange for this to be powder coated to different colours at additional cost - please contact us on 01 4569 328 or sales [at] goldstarplastics.ie for more information.
40mm is the width of the aluminium and 51mm is the overall width with the gaskets compressed
Colours - available in White, Brown, or Mill Finish
High quality supple EPDM gasket with cord, re-tained in situ by special design
So versatile for - conservatories, sky light roofing, glazed walk ways, shopping centres, swimming pools, railway and bus stations etc
25mm nine wall polycarbonate sheeting is ideal for conservatories, sun rooms, lean-tos, canopies, pergolas, gazebos, porches, industrial roofing, interior partitions, and more.
25mm nine wall...
Capex snap down glazing bar. Suitable for polycarbonate of the following thicknesses: 10mm, 16mm, 20mm, 25mm
Available in the following sizes: 2m, 2.5m, 3m, 4m, 5m, 6m
Availble in White (RAL 9010)...
Aluminium F Profiles are used on the side of polycarbonate or glass roofs as a glazing side support and closure. They can be screwed in at the side into the timbers in order to stop sheets from...
Capex 40mm gable end finishing profile with rafter gasket included. For use in roofing alongside the Capex 40mm aluminium capping bar.
Ideal for capping roofs with polycarbonate (any thickness) or...
Capex Snap Down gable end finishing profile. For use in roofing alongside the Capex Snap Down glazing bar.
Ideal for capping roofs with polycarbonate of following thicknesses: 10mm, 16mm, 20mm and...
10mm twin wall polycarbonate sheeting is ideal for lean-tos, canopies, pergolas, gazebos, conservatories, porches, industrial roofing, interior partitions, and more.
Twin wall sheeting is most...
Aluminium F Profiles are used on the side of polycarbonate or glass roofs as a glazing side support and closure. They can be screwed in at the side into the timbers in order to stop sheets from...
PVC fixing buttons and screws for multiwall polycarbonate. The price is for each pack of ten fixing buttons. We recommend spacing these buttons every 2 feet / 600mm on the intermediate rafters.
Made...
Capex 40mm gable end finishing profile with rafter gasket included. For use in roofing alongside the Capex 40mm aluminium capping bar.
Ideal for capping roofs with polycarbonate (any thickness) or...
PVC U profile to be used at the gutter end of each sheet. This profile protects the breathable ventilated tape that we put on each sheet of polycarbonate and stops the tape from damage due to weather...
Capex snap down glazing bar. Suitable for polycarbonate of the following thicknesses: 10mm, 16mm, 20mm, 25mm
Available in the following sizes: 2m, 2.5m, 3m, 4m, 5m, 6m
Availble in White (RAL 9010)...
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
