Aluminium Lean-To Flashing Profile. Suitable for use with a polycarbonate (any thickness) or glass roof, for covering the gap in between the top of the sheets and the wall of the building.
Lengths: 3m or 6m. Please note, we can't always send 6m lengths due to courier restrictions.
Colours: White, brown, grey or mill finish (unpainted). If you select mill finish (unpainted), we can arrange for this to be powder coated to different colours at additional cost - please contact us on 01 4569 328 or sales [at] goldstarplastics.ie for more information. White and Brown colours are kept in stock. Grey and Mill Finish need to be ordered from the manufacturer with an approximate lead time of 5 to 7 working days.
PVC U profile to be used at the gutter end of each sheet. These profiles are 2100mm in length. This profile protects the breathable ventilated tape that we put on each sheet of polycarbonate and...
PVC J Profile for use with our PVC hygienic wall cladding sheets. J Profiles come in 3.05 metre lengths in white colour only.
One J profile can be cut in half to cover the top and bottom of a sheet...
Two-part H Profile joiner for our 2.5mm thick hygienic PVC wall cladding sheets. Suitable for joining sheets together. Simply stick the larger part to the wall with silicone and clip the other part...
Capex 40mm wall flashing profile with rafter gasket included. For use in roofing alongside the Capex 40mm aluminium capping bar as a side profile where the glass or polycarbonate roofing sheets meet...
Capex 60mm gable end finishing profile with rafter gasket included. For use in roofing alongside the Capex 60mm aluminium capping bar as a side profile where the glass or polycarbonate roofing...
Capex 40mm wide aluminium capping bar with rafter gasket included. Please select both the length and colour to get the price for the item.
Ideal for capping roofs with polycarbonate (any...
If you tell us the total area you are looking to have covered by email at sales@goldstarplastics.ie, we can work out the recommended accessories for you. All sizes are to be provided in millimetres...
PVC fixing buttons and screws for multiwall polycarbonate. The price is for each pack of ten fixing buttons. We recommend spacing these buttons every 2 feet / 600mm on the intermediate rafters.
Made...
PVC U profile to be used at the gutter end of each sheet. These profiles are 2100mm in length. This profile protects the breathable ventilated tape that we put on each sheet of polycarbonate and...
Aluminium F Profiles are used on the side of polycarbonate or glass roofs as a glazing side support and closure. They can be screwed in at the side into the timbers in order to stop sheets from...
Capex 60mm wide aluminium capping bar with rafter gasket included. Please select both the length and colour to get the price for the item.
Ideal for capping roofs with polycarbonate (any thickness)...
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
