We are no longer stocking this item. Please order Capex 40/51 Gable End Finishing Profile instead.
Capex Snap Down gable end finishing profile. For use in roofing alongside the Capex Snap Down glazing bar.
Ideal for capping roofs with polycarbonate of following thicknesses: 10mm, 16mm, 20mm and 25mm. This glazing bar is not suitable for thicknesses outside of this range.
Lengths: 2.0m, 2.5m, 3.0m, 4.0m, 5.0m, 6.0m.
Colours: White or brown.
Capex Snap Down Gable End Finishing Profile
Economy roof glazing bar
Ideal for lean-tos, shelters etc.
Easily fitted - snaps into place
Heavy duty aluminium base section with a tough UV stable upper section
Suitable for polycarbonate - 10mm, 16mm, 20mm, 25mm thick
Please click here for a link to the manufacturer's website.
We are no longer stocking this item. Please order Capex 40/51 Rag 45 Capping Bars instead.
Capex snap down glazing bar. Suitable for polycarbonate of the following thicknesses: 10mm, 16mm, 20mm,...
Capex 40mm gable end finishing profile with rafter gasket included. For use in roofing alongside the Capex 40mm aluminium capping bar as a side profile to cover the gable end of a roof.
Ideal for...
Capex 40mm wall flashing profile with rafter gasket included. For use in roofing alongside the Capex 40mm aluminium capping bar as a side profile where the glass or polycarbonate roofing sheets meet...
Capex 60mm gable end finishing profile with rafter gasket included. For use in roofing alongside the Capex 60mm aluminium capping bar as a side profile to cover the gable end of a roof. Cape 60 bars...
Capex 60mm gable end finishing profile with rafter gasket included. For use in roofing alongside the Capex 60mm aluminium capping bar as a side profile where the glass or polycarbonate roofing...
If you tell us the total area you are looking to have covered by email at [email protected], we can work out the recommended accessories for you. All sizes are to be provided in millimetres...
Capex 40mm wide aluminium capping bar with rafter gasket included. Please select both the length and colour to get the price for the item.
Ideal for capping roofs with polycarbonate (any...
PVC U profile to be used at the gutter end of each sheet. These profiles are 2100mm in length. This profile protects the breathable ventilated tape that we put on each sheet of polycarbonate and...
We are no longer stocking this item. Please order Capex 40/51 Rag 45 Capping Bars instead.
Capex snap down glazing bar. Suitable for polycarbonate of the following thicknesses: 10mm, 16mm, 20mm,...
Aluminium F Profiles are used on the side of polycarbonate or glass roofs as a glazing side support and closure. They can be screwed in at the side into the timbers in order to stop sheets from...
PVC fixing buttons and screws for multiwall polycarbonate. The price is for each pack of ten fixing buttons. We recommend spacing these buttons every 2 feet / 600mm on the intermediate rafters.
Made...
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.